Dometic are responsible for the majority of refrigerators in the caravan industry today. We don't see too many problems with them but as things get more complicated it is inevitable that we will get some issues.
Below are the fault codes that way come up on the Swift command and what they mean.
DOMETIC ERROR CODE TABLE
Error Code 1
Issue, NTC fridge compartment defective, LED Display warning symbol on, all temperautre LEDs flashing
Solution Check connection of NTC sensor/ exchange NTC sensor
NTC 2 defective
2
warning symbol on
currently not in use
E03
no connection between display and power module
3
warning symbol on
Check connection display/powermodule
W05
AC not available or undervoltage (<190 V)
5
warning symbol on and AC flashing
Connect to AC or choose alternative energy supply (gas/DC)
W06
DC not available
6
warning symbol on and DC flashing
Connect to DC or choose alternative energy supply (gas/AC)
E07
no cooling performance in gas mode
7
warning symbol on
Device stands aslope/ cooling unit defective-> call service
E08
no cooling performance in AC mode
8
warning symbol on
Device stands aslope/ cooling unit or AC heater defective-> call service
E09
no cooling performance in DC mode
9
warning symbol on
Device stands aslope/ cooling unit or DC heater defective-> call service
W10
door open (longer than 2 minutes)
10
warning symbol on and beeping
Shut the door
W11
Overvoltage DC (>16 VDC)
11
warning symbol on
Reduce DC supply voltage
E12
daily gas valve test error
12
warning symbol on
No gas mode possible; reset /power cycle; if failure occurs again call service
E13
Dynamic "valve-on" error
13
warning symbol on
No gas mode possible; reset /power cycle; if failure occurs again call service
E50
Gas lockout no ignition after 3 attemps
50
warning symbol on and gas flashing
Failed ignition/gas bottle empty->reset
E51
Gas lockout , internal error on powermodule
51
warning symbol on and gas flashing
Reset; if failure remains, power module needs to be exchanged
E52
short to ground on gas valve
52
warning symbol on
Reset; if failure remains, connection to gas valve to be checked/ power module needs to be exchanged
E53
short to ground on ignition electrode
53
warning symbol on
Reset; if failure remains, connection to the electrode needs to be checked
Tankstop
gas mode is blocked for 15 minutes
gas flashing
gas mode is blocked for 15 minutes, after engine stop-> wait 15 minutes